My Worm Bin, Last Edited 7/29/12

My Worm Bin

Last edited 7/29/12

Ten gallon plastic tote from Wal-Mart, Sterilite Brand, cost about $5.

A wooden base in the bottom covered with window screening material provides air space under the bedding and a space to collect excess moisture.

I eliminated the drain – more on that later.

Several dry folded newspapers to act as a sponge to soak up excess moisture.

Shredded news paper strips that have been dampened make up the next layer.  This is the layer that the worms live in and in which you bury your food scraps.  It is also where the worm castings accumulate as the worms do their thing.

Dry shredded news paper strips on top of bedding to absorb excess moisture.

A layer of folded dry newspaper on top.

Screened vents in the top of the sides.

Edit: 7/29/12: I have eliminated the screened vents and instead use a piece of garden row cover to cover the top of the bin and hold it in place with a one inch wide nylon strap with an elastic piece sewn in.  The tension in the strap holds the row cover on tight. The row cover provides plenty of ventilation and does a better job of keeping flying insects out of the bin (or ones in the bin from flying out).  Particularly, this has solved a problem I had with fungus gnats infesting the bin.  The fungus gnats could access the bin through the screened vents.

I purchase the row cover from Gardener’s Supply Co. Item 32-646, All Purpose Fabric, 6ft X 20ft – enough for 24 worm bin covers.

Screened vents in the lid.

Edit: 7/29/12: The lid has been replaced with row cover.  I also lay a couple sheets of folded newspaper on top of the row cover to retard drying if the bin seems to be drying out.  

A baited Fly trap to capture fruit flies.

Edit: 7/29/12: If fruit flies are a problem then continue to use the baited fly trap.  I have had more trouble with fungus gnats and another small fly identified as a Minute Black Scavenger Fly which looks a lot like a fungus gnat.  They are not attracted to the vinegar bait in the fly trap.

New 7/29/12: A strip of TAT Fly Paper to trap flying insects inside the bin.

To trap flying insects inside the bin I use a strip of TAT Fly Paper unrolled from its container and stuck to a sheet of dry newspaper that is put in the top of the bin under the row cover.

Stick the bins if you stack them to allow ventilation.